Industrial Thermocouples

Product and Ordering Information

Ceramic Protecting Tube Assembly - Straight

Calibration Element *
Gauge (AWG.)
Tube **
Material
NPT ***
I.D. x O.D.
Ordering Code Options
Type Head "L"
Type N
Nicrosil - Nisil
8 AWG. C30 Ceramic
C98 Ceramic
9/16" x 3/4" NA30
NA98
Select Head From Table Below Specify "L" In Inches
Standard Lengths 12"-72" in 6" Increments
Adjustable Flange on a Steel Sleeve:
Specify by adding suffix "-A(x)" to ordering code. Replace (x) with sleeve length in inches.

Example: KB30-A-24-A12
a 12-Flange on 12" Sleeve
1 1/4" NPT Steel Bushing Welded To End of Steel Sleeve.
Specify by adding suffix "-K(x)" to ordering code. Replace (x) with sleeve length in inches.

Example: KA30-B-18-K6
K6-1 1/4" NPT Bushing on 6"Sleeve
14 AWG. C30 Ceramic
C98 Ceramic
7/16" x 11/16" NB30
NB98
Type K
Chromel - Alumel
8 AWG. C30 Ceramic
C98 Ceramic
9/16" x 3/4" KA30
KA98
14 AWG. C30 Ceramic
C98 Ceramic
7/16" x 11/16" KB30
KB98
Type R
Platinum - Plat. 13% Rhodium
24 AWG. (.020") C98 Ceramic 7/16" x 11/16" RD98
RD98 Assembly with 1/4" x 3/8" C98 Inner Primary RD982
Type S
Platinum - Plat. 10% Rhodium
24 AWG. (.020") C98 Ceramic 7/16" x 11/16" SD98
SD98 Assembly with 1/4" x 3/8" C98 Inner Primary SD982
Type B
Rhodium - Plat. 30% Rhodium
24 AWG. (.020") C98 Ceramic 7/16" x 11/16" BD98
BD98 Assembly with 1/4" x 3/8" C98 Inner Primary BD982

*A single or dual element will be furnished according to type of head selected from table below.

** Click here for tube material characteristics.

 

Optional Threads***
Materials and Sizes
NPT Bushing Material Order Code
3/4" Carbon Steel (Standard)
3/4" 304 S.S. 6S
1" Carbon Steel 8C
1" 304 S.S. 8S

 

Terminal Head Options
Head Terminal Block Specify
Cast Iron Screw Cover Single
Dual
A
AD
Cast Aluminum Screw Cover Single
Dual
B
BD
Polished Cast Aluminum General Purpose Single
Dual
C
CD

How to order:

  1. Select calibration and gauge of element desired, tube material and size from first four columns of the table. Specify by "Type" under Ordering Code.
  2. Select a head from table above and place its code letter next.
  3. Specify "L" in inches.
  4. Specify option next if desired.
For Example:
RD98   -   C   -   18   -   K8
Type Head "L" Option