Industrial Thermocouples

Product and Ordering Information

Ceramic Protecting Tube Assembly - Straight For Molten Metals and Furnaces

Calibration Element**
Gauge
Primary*
Tube
Tube Size
I.D. x O.D.
Secondary*
Tube
Ordering Code
Type Head Length
Type K
Chromel - Alumel
8 AWG. C30 Ceramic 9/16" x 3/4" SCT
(Silicon Carbide)
KA30SC Select
from
table
below
Specify
"L"
in
inches
Type N
Nicrosil - Nisil
8 AWG. C30 Ceramic 9/16" x 3/4" NA30SC
NASC
Type R Platinum - Platinum -13% Rhodium 24 AWG. (.020") C98 Ceramic 7/16" x 11/16" SCT
(Silicon Carbide)
RD98SC
RD98SC Assembly with
1/4" x 3/8" C98 Inner Primary
RD982SC
Type S
Platinum - Platinum-10% Rhodium
24 AWG. (.020") C98 Ceramic 7/16" x 11/16" SD98SC
SD98SC Assembly with
1/4" x 3/8" C98 Inner Primary
SD982SC
Type B
Plat. -6% Rhodium
Plat. 30% Rhodium
24 AWG. (.020") C98 Ceramic 7/16" x 11/16" BD98SC
BD98SC Assembly with
1/4" x 3/8" C98 Inner Primary
BD982SC

* Click here for characteristics of ceramic tubes.

** Selection of a head from table below will determine whether a single or dual element is furnished.

 

Terminal Head Options
Head Terminal Block Specify
Cast Iron Screw Cover Single
Dual
A
AD
Cast Aluminum Screw Cover Single
Dual
B
BD
Polished Cast Aluminum General Purpose Single
Dual
C
CD

How to order:

  1. Select the desired calibration, wire size, primary and secondary tubes required from the first 4 columns of the table. Specify by "Type" under Ordering Code.
  2. Select the desired head from table above and place its code letter next.
  3. Place the desired "L" dimension (in inches) after the "Type" code.
For Example:
KA30SC   -   A   -   24
Type Head "L"