Industrial Thermocouples

Product and Ordering Information

Right Angle Assemblies - Pipe Extended

Calibration Element* Gauge-AWG Tube
(Hot Leg)
Ordering Code Options
IPS O.D. Type Hot Leg** Material Head Cold Leg Hot Leg
Type J
Iron - Constantan
8 AWG 1/2"
3/4"
1"
.840
1.050
1.315
JA42
JA64
JA40
Select material code from the Material Table in the Thermowell section Select from table below Specify in Inches Specify in Inches Adjustable Flange - If an adjustable flange is desired, add suffix "A" to complete ordering code.
14 AWG 1/2"
3/4"
1"
.840
1.050
1.315
JB42
JB64
JB40
Type K
Chromel - Alumel
8 AWG 1/2"
3/4"
1"
.840
1.050
1.315
KA42
KA64
KA40
14 AWG 1/2"
3/4"
1"
.840
1.050
1.315
KB42
KB64
KB40
Type E
Chromel - Constantan
8 AWG 1/2"
3/4"
1"
.840
1.050
1.315
EA42
EA64
EA40
14 AWG 1/2"
3/4"
1"
.840
1.050
1.315
EB42
EB64
EB40
Type N
Nicrosil - Nisil
8 AWG 1/2"
3/4"
1"
.840
1.050
1.315
NA42
NA64
NA40
14 AWG 1/2"
3/4"
1"
.840
1.050
1.315
NB42
NB64
NB40

* a Single or dual element will be furnished according to the type of head selected from the table below.

** All assemblies are supplies with standard hot legs made with schedule 40 pipes. To specify schedule 80 or 160 - insert "(80)" or "(160)" between the "Type" and "Material" selections in the ordering code table. Example: JA42(80)34-A-18-24.
Exception: When a cast iron tube (material code 86 or 87) is used, pipe schedules do not apply. See page 41 for dimensions.
Note: An ordering code type having a "64" in it (3/4" IPS) should be used when ordering an angle assembly with a cast iron tube (material code 86 or 87).

Terminal Head Options
Head Terminal Block Specify
Cast Iron Screw Cover Single A
Dual AD
Cast Aluminum Screw Cover Single B
Dual BD

How To Order:

  1. Select the type and gauge of element desired, the size of tube abailable from the first four columns of the table. Specify by "Type" under ordering code.
  2. Select desired "Hot Leg" material code from the Material Table and add to "Type" designation.
  3. Select a head from table above and place its code letter next.
  4. Specify cold leg length in inches.
  5. Specify hot leg length in inches.
  6. Specify option next if desired.
For Example:
KA6436   -   A   -   18   -   24   -   A
Type/Matl. Head Cold Leg Hot Leg Option