MGO Thermocouple Configurator

Step 1 of 4

25%

Cerampak Selection

Sheath Diameter

ANSI / Thermocouple Type

Single / Dual

Sheath Material

Hot Junctions

Grounded

Exposed

Ungrounded

Ungrounded and Isolated (Dual - 4 Wire T/C only)

Welding Pad* Horizontal Grounded

Welding Pad* Horizontal Ungrounded

Welding Pad* Ungrounded and isolated (Dual T/C only)

Welding Pad* Vertical Grounded

Welding Pad* Vertical Ungrounded

Welding Pad* Vertical Ungrounded and Isolated (Dual T/C only)

Sensor Length in Inches and Decimal Increments

Cold Junctions Terminations

Connectors / Fittings (No Head Included - Head Selection Below)

Direct Leads

1/2″ NPT x 1/2″ NPT SS Double threaded bushing brazed to the sheath.

1/2″ NPT SS threaded bushing brazed to sheath.

1/2″ NPT x 1/2″ NPT SS Double threaded bushing spring-loaded to sheath

Standard Male Plug

Standard Female Jack

Dual Male Plug

Dual Female Jack

Miniature Male Plug (for sheath diameters 1/8″ maximum)

Miniature Female Jack (for sheath diameter 1/8″ maximum)

For longer lengths; replace “3” with desired length.

Extended Leads / Lead Terminations

20 AWG Wire Extension

20 AWG Wire Extension Inside Stainless Steel Overbraid

20 AWG Wire Extension inside stainless steel flexible tubing armor.

20 AWG Wire Extension inside polyvinyl covered stainless steel flexible tubing armor.

“DRIP loop” style T/C’s are available in armored lead options. Choose head option in the hardware section and add head order code as a suffix to the complete part number.

X-Length in Inches

Insulation

Terminal Heads

T/C Assembly Without Process Fitting

T/C Assembly w/ 1/2″ NPT Process Fitting

T/C Assembly w/ 1/2″ NPT Spring Loaded Fitting

Head Type Selected from Type of Head Field Below

Type of Head

Industrial Weatherproof Screw Cover Head

Epoxy Coated Weatherproof Screw Cover Head

General Purpose Weatherproof Screw Cover Head

Corrosion Resistant Weatherproof Screw Cover Head

CSA / ATEX / FM Approved Explosion Proof Head meets NEC Class I Div I Groups B, C, D Class II Div I, Groups E, F, G NEMA 4X, 7, 9, II2G, Ex d, IIC, Gb, II2 D, Ex tb, IIIC Db, IECEx

Head Material

Mounting Fittings / Miscellaneous Options*

*All mounting and misc selections are optional.

Stainless Steel Adjustable Mounting Fittings

Compression Type (One time adjustable) - Metal Collets

Compression Type (Readjustable) - FEP Collets

Note: Fittings furnished may not have the same physical appearance as illustrated above, but will be functionally equal.

Mounting NPT

*3/4″ npt compression type fittings are supplied as smaller npt fittings bushed to 3/4″ npt.

Extended Leads / Lead Terminations

Spade Lugs for No. 8 Screw

Male Plug

Female Jack

1/2″ NPT “BX” Connector (not watertight)

Water Tight Connector for Condulet Installation (Neopren sealant)

NTP

Miscellaneous Options

Adjustable Spring “FP-275”

Adjustable Spring Loaded Fitting - SSL

Adjustable Spring Loaded Fitting - FP 240

SSL & FP-275

Bends

To specify a bend, type the angle of the bend, followed by the letter "B", and the length from the tip. Example: "90 B8" for a 90° bend 8″ from tip.

High Temp Potting

To specify a higher temperature than the 300° F. rated material in the transition, select one of these options.

Personal Information

First Name*

Last Name*

Email*

Phone*

Company

Zip / Postal Code

Configure Your MGO Thermocouple

Cerampak Selection

Hot Junctions

Cold Junctions Terminations

Mounting Fittings / Miscellaneous Options*

Personal Information