Product and Ordering Information
| Calibration | Element** Gauge | Primary* Tube | Tube Size I.D. x O.D. | Secondary* Tube | Ordering Code | |||
| Type | Head | Length | ||||||
B a s e M e t a l | Type K Chromel – Alumel | 8 AWG. | C30 Ceramic | 9/16″ x 3/4″ | SCT (Silicon Carbide) | KA30SC | Select from table below | Specify “L” in inches |
Type N Nicrosil – Nisil | 8 AWG. | C30 Ceramic | 9/16″ x 3/4″ | NA30SC | ||||
| NASC | ||||||||
N o b l e M e t a l | Type R Platinum – Platinum -13% Rhodium | 24 AWG. (.020″) | C98 Ceramic | 7/16″ x 11/16″ | SCT (Silicon Carbide) | RD98SC | ||
RD98SC Assembly with 1/4″ x 3/8″ C98 Inner Primary | RD982SC | |||||||
Type S Platinum – Platinum-10% Rhodium | 24 AWG. (.020″) | C98 Ceramic | 7/16″ x 11/16″ | SD98SC | ||||
SD98SC Assembly with 1/4″ x 3/8″ C98 Inner Primary | SD982SC | |||||||
Type B Plat. -6% Rhodium Plat. 30% Rhodium | 24 AWG. (.020″) | C98 Ceramic | 7/16″ x 11/16″ | BD98SC | ||||
BD98SC Assembly with 1/4″ x 3/8″ C98 Inner Primary | BD982SC | |||||||
* Click here for characteristics of ceramic tubes.
** Selection of a head from table below will determine whether a single or dual element is furnished.
| Terminal Head Options | ||
| Head | Terminal Block | Specify |
| Cast Iron Screw Cover | Single Dual | A AD |
| Cast Aluminum Screw Cover | Single Dual | B BD |
| Polished Cast Aluminum General Purpose | Single Dual | C CD |
How to Order
- Select the desired calibration, wire size, primary and secondary tubes required from the first 4 columns of the table. Specify by “Type” under Ordering Code.
- Select the desired head from table above and place its code letter next.
- Place the desired “L” dimension (in inches) after the “Type” code.
| For Example: | ||||||||
| KA30SC | – | A | – | 24 | ||||
| Type | Head | “L” | ||||||