Product and Ordering Information

Right Angle Assemblies - Pipe Extended 1 | Thermo Sensors

Calibration Element* Gauge-AWG

Tube

(Hot Leg)

Ordering Code Options
IPS O.D. Type Hot Leg** Material Head Cold Leg Hot Leg

Type J

Iron – Constantan

8 AWG

1/2″

3/4″

1″

.840

1.050

1.315

JA42

JA64

JA40

Select material code from the Material Table in the Thermowell section Select from table below Specify in Inches Specify in Inches Adjustable Flange – If an adjustable flange is desired, add suffix “A” to complete ordering code.
14 AWG

1/2″

3/4″

1″

.840

1.050

1.315

JB42

JB64

JB40

Type K

Chromel – Alumel

8 AWG

1/2″

3/4″

1″

.840

1.050

1.315

KA42

KA64

KA40

14 AWG

1/2″

3/4″

1″

.840

1.050

1.315

KB42

KB64

KB40

Type E

Chromel – Constantan

8 AWG

1/2″

3/4″

1″

.840

1.050

1.315

EA42

EA64

EA40

14 AWG

1/2″

3/4″

1″

.840

1.050

1.315

EB42

EB64

EB40

Type N 

Nicrosil – Nisil

8 AWG

1/2″

3/4″

1″

.840

1.050

1.315

NA42

NA64

NA40

14 AWG

1/2″

3/4″

1″

.840

1.050

1.315

NB42

NB64

NB40

* a Single or dual element will be furnished according to the type of head selected from the table below.

** All assemblies are supplies with standard hot legs made with schedule 40 pipes. To specify schedule 80 or 160 – insert “(80)” or “(160)” between the “Type” and “Material” selections in the ordering code table. Example: JA42(80)34-A-18-24.

Exception: When a cast iron tube (material code 86 or 87) is used, pipe schedules do not apply. See page 41 for dimensions. 

Note: An ordering code type having a “64” in it (3/4″ IPS) should be used when ordering an angle assembly with a cast iron tube (material code 86 or 87).

Terminal Head Options
Head Terminal Block Specify
Cast Iron Screw Cover Single A
Dual AD
Cast Aluminum Screw Cover Single B
Dual BD

How to Order

  1. Select the type and gauge of element desired, the size of tube abailable from the first four columns of the table. Specify by “Type” under ordering code.
  2. Select desired “Hot Leg” material code from the Material Table and add to “Type” designation.
  3. Select a head from table above and place its code letter next.
  4. Specify cold leg length in inches.
  5. Specify hot leg length in inches.
  6. Specify option next if desired.
For Example:
KA6436      A      18      24      A
Type/Matl. Head Cold Leg Hot Leg Option
« Previous