Product and Ordering Information
Table 1
Sheath Diameter | Order Code | ANSI Calibration | Order Code | Sheath Material | Order Code | |
Single | Dual | |||||
020″ 025″ 032″ 040″ 3/32″ 1/16″ 1/8″ 3/16″ 1/4″ 5/16″ 3/8″ 1/2″ |
020 025 032 040 093 1 2 3 4 5 6 8 |
Chromel/Constantan Iron/ Constantan Chromel/Alumel Nicrosil/Nisil Copper/Constantan Plat 10% RH/Plat Plat 13% RH/Plat Plat 30% RH/PT 6% RH |
E J K N T S R B |
2E 2J 2K 2N 2T 2S 2R 2B |
304 St. St. 310 St. St. 316 St. St. 410 St. St. 446 St. St. Inconel 600 Inconel 601 Incoloy 800 Tantalum Platinum Monel Hastelloy “X” Hastelloy “C” Hastelloy “B” Nickel H2300 |
34 30 36 40 46 60 61 80 99 97 96 95 94 93 92 23 |
Notes:
1. For Premium Grade (Special Limits of Error) material; add “PG” to the calibration code.
Example: 4KPG60
Hot Junctions | Order Code | |
Grounded | G | |
Exposed | E | |
Ungrounded | U | |
Ungrounded and Isolated (Dual – 4 Wire T/C only) |
UI | |
Welding Pad* Horizontal Grounded | P | |
Welding Pad* Horizontal Ungrounded | UP | |
Welding Pad* Ungrounded and isolated (Dual T/C only) | UIP | |
Welding Pad* Vertical Grounded | VP | |
Welding Pad* Vertical Ungrounded | VU | |
Welding Pad* Vertical Ungrounded and Isolated (Dual T/C only) | UVI |
* 1″ x 1″ x 1/8″ pad furnished. Stainless steel hold-down clips to secure the pad thermocouple horizontally to the process tube are available. (Fits 3/16″ & 1/4″ O.D. Sensor). Specify Part Number 101-4.
Sensor Length | |
Refer to your selection of a Cold Junction Termination from Table 4 and specify required Length (“L”). | |
Order Code: | Specify “L” in Inches and Decimal Increments |