Product and Ordering Information
Table 5
| Stainless Steel Adjustable Mounting Fittings | |||
|
Compression Type (One time adjustable)
Metal Collets |
Compression Type (Readjustable)
FEP Collets |
||
| Mounting NPT | Order Code | Mounting NPT | Order Code |
|
1/8″ NPT 1/4″ NPT 3/8″ NPT 1/2″ NPT *3/4″ NPT |
1AS 2AS 3AS 4AS 6AS |
1/8″ NPT 1/4″ NPT 3/8″ NPT 1/2″ NPT *3/4″ NPT |
1RS 2RS 3RS 4RS 6RS |
*3/4″ npt compression type fittings are supplied as smaller npt fittings bushed to 3/4″ npt.
Note: Fittings furnished may not have the same physical appearance as illustrated above, but will be functionally equal.
| Extended Leads / Lead Terminations | Order Code | ||
 |
Spade lugs for No. 8 screw. | L | |
 |
Male plug. | M (400 F) | |
| HM (800 F) | |||
 |
Female jack. | F (400 F) | |
| HF (800 F) | |||
 |
1/2″ npt “BX” connector (not watertight). |
BX | |
|
Water tight connector for condulet installation. (Neopren sealant). |
1/2″ npt | W1 |
| 3/4″ npt | W3 | ||
| Miscellaneous Options | ||
|
A) Bends: To specify a 90 bend along the “L” length; Add “- 90 B (Length from Tip) Example: 90 B8 for a 90° bend 8″ from tip. |
||
|
B) High Temp Potting: To specify a higher temperature than the 300° F. rated material in the transition, Add the following suffix: For 400° F Epoxy: -EII For 1000° F Cement: -HTC |
||
| C) Adjustable spring “FP-275” | Order Code | FP 275 |
 |
||
| D) Adjustable spring loaded fitting | Order Code | SSL |
 |
||
| E) Adjustable spring-loaded fitting | Order Code | FP 240 |
 |
||